Aluminum Flat Bar is one of the most popularly used products in the structural, marine, and fabrication industries. The main reason for this is its light weight, non-corrosive property, and a high strength to weight ratio. The bars are naturally made in aluminum grades such as 6061, 6082 and 7075 and adhere to ASTM B221 and EN 573 standards. Besides, the bars are available in different tempers like T6, T651 and O condition. Normally, these parts are 3 mm to 150 mm thick and their widths can be more than 200 mm depending on the extrusion capacity.Grades differ from each other in mechanical properties so, for example, 6061-T6 has a tensile strength of around 290 MPa and it can be welded without difficulty.
Due to these features, it is very suitable for making industrial frames, base plates, and support structures. Material selection for the major projects in Riyadh and Dammam is largely influenced by factors such as dimensional tolerances, surface finish, and ease of machining. The laboratory also performs tests on extrusion and precision milled finishes as well as hardness and straightness to check for conformance of the items to the engineering drawings. On pipingmaterial.sa, customers are offered a broad variety of Aluminum Flat Bar suppliers who have been through the rigorous selection process and only certified stocks with full mill test reports and traceable batch identification are offered.
To improve the torque transmission and effectiveness of machining, Aluminum Hex Bars are always among the top choice raw materials for the production of fasteners, couplings, and precision components. Usually, 6061, 2014, and 2024 are the grades that manufacturers have consistently depended on to make bars from 8 mm to 80 mm across flats, and these bars fully meet ASTM B211 and B221 standards. By using pipingmaterial.sa, Jeddah procuring teams get the opportunity to meet and hold discussions with real buyers and suppliers of certified Aluminum Hex Bars for their use in mechanical and high-performance structural assemblies.
Due to these features, it is very suitable for making industrial frames, base plates, and support structures. Material selection for the major projects in Riyadh and Dammam is largely influenced by factors such as dimensional tolerances, surface finish, and ease of machining. The laboratory also performs tests on extrusion and precision milled finishes as well as hardness and straightness to check for conformance of the items to the engineering drawings. On pipingmaterial.sa, customers are offered a broad variety of Aluminum Flat Bar suppliers who have been through the rigorous selection process and only certified stocks with full mill test reports and traceable batch identification are offered.
To improve the torque transmission and effectiveness of machining, Aluminum Hex Bars are always among the top choice raw materials for the production of fasteners, couplings, and precision components. Usually, 6061, 2014, and 2024 are the grades that manufacturers have consistently depended on to make bars from 8 mm to 80 mm across flats, and these bars fully meet ASTM B211 and B221 standards. By using pipingmaterial.sa, Jeddah procuring teams get the opportunity to meet and hold discussions with real buyers and suppliers of certified Aluminum Hex Bars for their use in mechanical and high-performance structural assemblies.